Using Job Mode
Use the Job Mode feature to build a single copy job from multiple scans. You can use either
the ADF or the scanner glass. The settings for the first scan are used for subsequent scans.
1. Touch Copy.
2. Touch Describe Original.
3. Touch Advanced.
4. In the Job Mode check box, touch On.
5. Select any output settings, if necessary
6. After each page is scanned, the control panel prompts you for more pages.
7. Do one of the following:
If the job contains more pages, load the next page, and then press
S
TART
.
If the job contains no more pages, touch Finished to print.
Note
In Job Mode, if you scan the first page of a document by using the ADF, then you must scan
all of the pages in that document by using the ADF. If you scan the first page of a document
by using the scanner glass, then you must scan all of the pages in that document by using
the scanner glass.
ENWW
Basic copying instructions
103