Configuration page
Use the configuration page to view current MFP settings, to help troubleshoot MFP
problems, or to verify installation of optional accessories, such as memory (DIMMs), trays,
and printer languages.
Note
If an optional 3-bin mailbox or stapler/stacker is installed, a page also prints for that device.
Note
If an HP LaserJet analog fax accessory 300 is installed, a fax accessory page also prints.
See the HP LaserJet Analog Fax Accessory 300 User Guide for information about
understanding the fax accessory page.
ENWW
Checking the MFP configuration
161
The MFP configuration page contains the following information:
1
Device Information lists the serial number, page counts, firmware datecodes, maintenance-kit
counts, and other information for the MFP.
2
Installed Personalities and Options lists all MFP languages that are installed (such as PCL and
PS), and lists options that are installed in each DIMM slot and EIO slot.
3
Memory lists the MFP memory information, PCL Driver Work Space (DWS), and I/O buffering and
Resource Saving information.
4
Event Log lists the number of entries in the log, the maximum number of entries viewable, and the
last three entries. The second page of the event log is the manufacturer page. This page contains
information that might assist HP Customer Care representatives in solving possible MFP problems.
5
Security lists the status of the control-panel lock, control-panel password, and disk drive.
6
Paper Trays and Options lists the size settings for all trays and lists paper-handling accessories
that are installed.
Note
The content of the configuration page varies, depending on the options that are currently
installed in the MFP.
162
Chapter 9 Managing and maintaining the MFP
ENWW