Configuring the trays by using the Paper handling menu
You can configure the media type and size for the input trays without a prompt on the MFP
control panel display. Use the following procedure to gain access to the PAPER HANDLING
menu and configure the trays.
To configure the media size for a tray
1. Touch Menu.
2. Touch PAPER HANDLING.
3. Touch TRAY <N> SIZE.
4. Touch the media size that is loaded.
5. Touch EXIT to exit the menus.
Note
Depending on the size that you selected, the MFP might prompt you to move the media
guides. Follow the instructions on the control panel, and then close the tray.
To configure the media type for a tray
1. Touch Menu.
2. Touch PAPER HANDLING.
3. Touch TRAY <N> TYPE.
4. Touch the media type that is loaded.
5. Touch EXIT to exit the menus.
28
Chapter 1 MFP basics
ENWW
2