HP Jetdirect LEDs
The embedded HP Jetdirect print server has two LEDs, one for each possible link speed.
When an LED is lit, the print server is functioning correctly. A link failure is indicated when
both LEDs are off.
For link failures, check all of the network cable connections. In addition, you can try to
manually configure the link settings on the embedded print server by using the MFP
control-panel menus.
1. Touch Menu.
2. Touch CONFIGURE DEVICE.
3. Touch I/O.
4. Touch EMBEDDED JETDIRECT MENU
5. Touch LINK SPEED. Select the appropriate link speed.