Copy/send settings
This table lists the options that are available for the COPY/SEND SETTINGS, which are part
of the SYSTEM SETUP submenu.
Values
Explanation
INACTIVITY TIMEOUT
Defines the amount of time until the copy settings return to the
default settings after any control-panel activity is completed.
AUTO SETTINGS RESET
Controls whether copy/send settings revert to default settings
after the defined INACTIVITY TIMEOUT period.
TIMEOUT AFTER SEND
Defines the amount of time before the send settings return to the
default settings after any control-panel activity is completed.
HOLD OFF PRINT JOB
Prevents network print jobs from starting within a specified period
after a copy is completed.
HOLD OFF TIME
Defines the amount of time that print jobs must wait if HOLD OFF
PRINT JOB is set to ON.
SCAN AHEAD
Allows a copy job to be scanned even if the MFP is printing
another job. The job will be scanned and held until it can be
printed. If this setting is set to OFF, the job is not scanned until the
print job is completed.
AUTO JOB INTERRUPT
Allows a copy job to automatically interrupt any currently printing
network print job. The copy job is placed between full copies of
the job that is currently printing. If this setting is set to OFF, the
job is not printed until all copies of the print job are completed.
COPY JOB INTERRUPT
Allows you to interrupt the current copy job to make a different
copy. When you press the
S
TART
button, the MFP shows a
message that asks if you want to interrupt the current copy job.
ENWW
Configure device menu
55
Values
Explanation
EDGE-TO-EDGE COPIES
Indicates whether copies are printed edge-to-edge (within 2 mm,
or 0.08 inch, of the edge of the paper) or whether they have the
normal, unprintable border (6.35 mm, or 0.25 inch).
AUDIBLE FEEDBACK
Gives an audible indication when you press a button or when you
touch an interactive area of the touchscreen.