Resets submenu
To gain access to this menu, touch CONFIGURE DEVICE, and then touch RESETS.
Note
Use this menu with caution. You can lose buffered page data or MFP configuration settings
when you select these items. Reset the MFP only under the following circumstances:
●
You want to restore the MFP default settings.
●
Communication between the MFP and computer has been interrupted, and you are not
able to resolve the problem by any other method. See
Solving network connectivity
problems
.
●
You are having problems with a port.
The items in the Resets submenu will clear all memory in the MFP, while pressing the
R
ESET
button clears only the current job.
Item
Values
Explanation
RESTORE FACTORY
SETTINGS
No value to select
This item restores all
control-panel settings to the
original factory settings.
CLEAR MAINTENANCE
MESSAGE
No value to select
Use this item to temporarily
clear the ORDER
MAINTENANCE KIT and
REPLACE MAINTENANCE
KIT warning messages. The
REPLACE MAINTENANCE
KIT message will reappear
periodically until you replace
the maintenance kit.
ENWW
Configure device menu
61
Item
Values
Explanation
CLEAR DOCUMENT FEEDER
MESSAGE
No value to select
Use this item to to temporarily
clear the ORDER DOCUMENT
FEEDER KIT and REPLACE
DOCUMENT FEEDER KIT
warning messages. The
REPLACE DOCUMENT
FEEDER KIT message will
reappear periodically until you
replace the maintenance kit.
SLEEP MODE
ON*
OFF
Turns sleep mode on or off.
Using sleep mode offers the
following advantages:
●
Minimizes the amount of
power that the MFP
consumes when it is idle
●
Reduces wear on
electronic components in
the MFP
The MFP automatically exits
sleep mode when you send a
print job, receive a fax, touch
any button on the control panel,
touch any part of the
touchscreen, open the scanner
lid, or load media into the ADF.
You can set how long the MFP
remains idle before it enters
sleep mode. See the SLEEP
DELAY information in the
System setup submenu
.
LOCK CARRIAGE
No value to select
This item must be selected
before engaging the Scanner
Head Lock. It moves the
carriage into a position where it
can be locked.
CLEAR ADDRESS BOOK
No value to select
This item clears all addresses
from the address book.
RESET SUPPLIES
NEW MAINTENANCE KIT
NEW DOCUMENT FEEDER
KIT
Use this item to notify the MFP
that a new maintenance kit or
document feeder kit has been
installed.
62
Chapter 2 Using the control panel
ENWW