Labels
CAUTION
To avoid damaging the MFP, use only labels recommended for laser printers. Never print on
the same sheet of labels more than once or print on a partial sheet of labels.
Label construction
When selecting labels, consider the quality of each component:
●
Adhesives: The adhesive material should be stable at 200°C (392°F), the printer's
fusing temperature.
●
Arrangement: Only use labels with no exposed backing between them. Labels can peel
off sheets with spaces between the labels, causing serious jams.
●
Curl: Prior to printing, labels must lie flat with no more than 13 mm (0.5 inch) of curl in
any direction.
●
Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.
For more information, see
Printing on labels
.
Note
Choose labels in the printer driver (see
Using the printer drivers
).