Guidelines for printing on both sides of paper
CAUTION
Do not print on both sides of labels, transparencies, envelopes, vellum, custom sizes, or
paper heavier than 28 lb (105 g/m
2
) because jams or damage to the MFP might occur.
Note the following guidelines:
●
Before using the duplexer, ensure that the printer driver is set to recognize it. The
procedure varies according to the operating system that you are using. For details, see
Using the printer drivers
. Look for the instructions in the column labeled "To change
configuration settings."
●
To print on both sides of paper, make the selection in your program or the printer driver.
(See the printer driver online Help.)
●
If you do not use the printer driver that came with the MFP, you might need to change
the duplex setting at the MFP control panel: set DUPLEX=ON on the CONFIGURE
DEVICE menu in the PRINTING submenu. Also on the PRINTING submenu, set
DUPLEX BINDING to LONG EDGE or SHORT EDGE. (For more information, see
Layout options for printing on both sides of paper
.)
86
Chapter 3 Printing
ENWW