HP LaserJet 4345 Multifunction Printer series - Printing on labels

background image

Printing on labels

Use only labels that are recommended for use in laser printers. Make sure that labels meet
the correct specifications. See

Labels

.

Follow these guidelines when printing on labels:

Print on a stack of up to 50 label sheets from tray 1 or a stack of up to 100 label sheets
from other trays.

Load labels in tray 1 with the front side facing up, and the top, short edge toward the
MFP. For other trays, load media with the front side facing down, and the top edge
toward the right.

Do not load or print on labels in the following ways:

CAUTION

Failure to follow these instructions can damage the MFP.

Do not load the trays to maximum capacity, because labels are heavier than paper.

Do not use labels that are separating from the backing sheet, wrinkled, or damaged in
any way.

Do not use labels that have the backing sheet exposed. (Labels must cover the entire
backing sheet, leaving no exposed spaces.)

Do not feed a sheet of labels through the MFP more than once. The adhesive backing is
designed for only one pass through the MFP.

Do not print on both sides of labels.

Do not print on sheets from which labels have been removed.