Curl or wave
1. Turn over the stack of paper in the tray. Also, try rotating the paper 180°.
ENWW
Correcting print-quality and copy-quality problems
227
2. Make sure that the type and quality of the paper that you are using meet HP
specifications. (See
Print media specifications
.)
3. Make sure that the environmental specifications for the MFP are being met. (See
Environmental specifications
.)
4. If paper is lightweight and smooth, open the CONFIGURE DEVICE menu at the control
panel. On the PRINT QUALITY submenu, select FUSER MODES, and then select the
paper type you are using. Change the setting to LOW 1, which helps reduce the heat in
the fusing process. (See
Print quality submenu
.) You must also set the type of paper for
the tray you are using. (See
Printing by type and size of media (locking trays)
.)